| OUTPUT module |
60 V - 5 A - 60 W |
| Output Voltage range |
0 to 60 V |
| Output Current range |
0 to 5 A |
| Output Power |
60 W |
| Overvoltage protection range |
2 to 62 V |
| Accuracy |
(at calibration temperature) |
| Output Voltage |
± (0.04 % of setting + 20 mV) |
| Output Current |
± (0.1 % of setting + 25 mA) |
| Over Voltage Protection |
± (0.5 % of setting + 250 mV) |
| Temperature coefficient |
|
| Output Voltage |
(0.016 % of setting + 2 mV)/K |
| Output Current |
(0.05 % of setting + 2 mA)/K |
| Long term drift |
(in an 8 hour period) |
| Output Voltage |
0.04 % of setting + 5 mV |
| Output Current |
0.05 % of setting + 10 mA |
| Programming Resolution |
(12bit) |
| Output Voltage |
15 mV/LSB |
| Output Current |
1.25 mA/LSB |
| Over Voltage Protection |
15 mV/LSB |
| Source Effect |
(For any line voltage change within rating) |
| Voltage |
± (0.01 % of setting + 2 mV) |
| Current |
± (0.02 % of setting + 2 mA) |
| Load Effect |
(load change 10 % to 90 % |
| Constant Voltage |
or 90 % to 10 % full load) |
| Constant Current |
± (0.01 % of setting + 5 mV) |
| Load cross regulation |
± (0.02 % of setting + 5 mA) |
| Output Noise (PARD) |
Negligible for both voltage and current |
| Constant Voltage pp/rms |
30 mV/6 mV |
| (40 Hz to 30 MHz) |
|
| Constant Current rms |
10 mA |
| Switching Frequency |
approx. 20 kHz |
| Accuracy |
(at calibration temperature) |
| Voltage |
± (0.05 % + 50 mV) |
| Current |
± (0.1 % + 15 mA) |
| Measuring Resolution |
(12 bit) |
| Voltage resolution to interface |
15 mV |
| Current resolution to interface |
1.25 mA |
| Voltage resolution to display |
10 mV |
| Current resolution to display |
10 mA |
| Max. Current at |
5 A |
| Reverse voltage |
|
| REMOTE SENSE |
> 0.25 Volt drop per lead (at open sense connections, the output voltage will not be more than 3 V above the programmed value) |
| DYNAMIC OPERATION |
ÆI=0.5 A between 0.5 and 5 A |
| Settling band |
|
| dI/dt |
± 50 mV |
| Overshoot |
< 0.5 A/µs |
| Recovery time |
< 150 mV |
| Programming response |
< 2 ms |
| Up (0 V to max. output) |
200 ms @ 1 A |
| Up (0 V to max. output) |
100 ms @ (no load) |
| Down(max. output to 1 V) |
200 ms @ 1 A |
| Down (max. output to 1 V) |
500 ms @ (no load) |
| Reprogramming delay |
|
| Range |
100 ms to 60 s |
| Resolution |
1 ms |
| Default |
100 ms |
| Step Interval time |
up to 60 s |
